What is 'B' Grade We have available some units that have minor scratches/damages and we are delighted to offer these at a reduced price. They are still covered by the usual non-perforation warranty however are not returnable under scratches or damages.
Shed Baron are so confident that their sheds are of the finest quality that they offer one of the best guarantees around - a 12 year no rust perforation guarantee. The reason that shed baron are able to offer such a terrific guarantee lies in the fact that their sheds are made from hot dipped galvinised steel throughout. Shed Baron sheds are rot and rodent, will not crack and will maintain lasting good looks unlike many wooden sheds. Supplied flat packed for self assembly. Sheds from shed baron are taller and as a result, much heavier and sturdier than almost all other 'thin clad' steel sheds. The gables are ventilated to help prevent condensation building up. A sturdy ramp makes entry to and exit from the shed easy - even with wheel barrows or lawn mowers. This range is available in 5 lengths and comes with the following Optional Accessories: Openable Window, Skylight, Corner Shelves, Rear Shelves, Wooden Floor Kit and Hilti Hammerscrews. Flat packed for self-assembly. Features:
- No rust.
- No cracks.
- Rot and rodent proof.
- Lasting good looks.
- Hot dipped galvinised steel construction throughout.
- Sturdier/heavier than most competitors.
- Strong ramp across door.
- 178cm (5'10") high walls.
- 12 year guarantee against rust perforation.
Specifications: 
| Footprint | Roof (WxL) | Base (WxL) | Door (WxH) | Ridge Height | Eaves Height |
 | 245 x 92 cm | 233 x 82 cm | 104 x 170 cm | 178 cm | 198 cm |
 | 245 x 154 cm | 233 x 144 cm | 104 x 170 cm | 178 cm | 198 cm |
 | 245 x 185 cm | 233 x 175 cm | 104 x 170 cm | 178 cm | 198 cm |
 | 245 x 216 cm | 233 x 206 cm | 104 x 170 cm | 178 cm | 198 cm |
 | 245 x 278 cm | 233 x 268 cm | 104 x 170 cm | 178 cm | 198 cm |
Please note: all measurements are approximate and Shed Baron's sheds are made from metric measurements.) Options:  | Hilti Hammerscrews: Fits through pre-drilled holes in the base rail. Fix by simply hammering on the head of the drive screw. Kit supplied with masonry drill bit. |
 | Timber floor kit: shown made up. Comprises fully impregnated half lapped boards and bearers. Nails for assembly, plus screws and washers to fix the shed base rail to the top surface of the floor are included. Pegs for securing to soil bases are not included. |
 | Long shelf support rails: these rails support the 12mm thick MDF board supplied. Fits to the rear wall of the shed, for spacious and secure shelving. Kit comprises parts for 2 levels of shelving |
 | Corner shelves: galvinised shelves and supports supplied in kits of one or three shelves. Simple fitting. Provides a good level of storage space to help organise all those smaller items. |
 | Openable Window: 3mm Styrene glazed sliding window. Can be fitted to any shed (except LOW 6x4 Pent). Approx. 615W x 330H mm. Kit supplied with cut down wall panel. |
 | Skylight: Translucent roof sheet available to permit daylight to the shed interior. Replaces one full width roof panel. |
Delivery Information Please Note: Customers ordering in the following Postal Regions ONLY - please ring for delivery surcharge in the following postal regions ONLY: AB, BT, DD, FK, HS, IM, IV, KY, KW, PA, PH, ZE Booking Delivery Once your order has been placed you will receive a letter within 7 working days confirming which week commencing date your order will be delivered. You will then be contacted by telephone one week after this date to advise you of a specific delivery date. Installation Service We offer an installation service on our Baron Grandale range of metal sheds. Please call our Sales Team for a quote on Freephone 0800 019 3865.