Flat Top Elite Timber Post Round Top Elite Post Elite Timber H Post Slotted Concrete Post Timber Gravel Board Concrete Gravel Board Heavy Duty Timber Post Cap Elite Panel Strip Metpost Gravel Board Clips Metpost Panel Clips Metpost Elite Post Anchor Metpost Pergola Anchor Metpost Bolt Down Shoe Metcrete |
 |
Timber Post - Posts come pressure treated for longer life in a rough sawn brown finish to match the fencing. Normally you would order one more post than the total number of panels you order (e.g. 4 panels requires 5 posts). Round Top Elite Timber Post - Posts come round topped to make your fencing that extra bit special, they are fully pressure treated for longer life in a smart planed green tint finish to match the fencing. Normally you would order one more post than the total number of panels you order (e.g. 4 panels requires 5 posts).
Elite Timber H Post - Posts come slotted to allow easy installation, there's no panel clips required it's simply a case of slotting each panel into the grooves in the posts and away you go. The post are fully pressure treated for longer life in a smart planed green tint finish to match the fencing. Normally you would order one more post than the total number of panels you order (e.g. 4 panels requires 5 posts).
Litecast Concrete Slotted Post - These make fencing installation quicker and easier, there's no need for panel clips it's simply a case of slotting the panels into the slots in the post and away you go. Once again normally you would order one more post than the total number of panels you order (e.g. 4 panels requires 5 posts).
Timber Gravel Boards - These are pressure treated boards designed to isolate fence panels from ground contact to protect them against moisture damage. Fitting a timber gravel board will raise the height of your fence by 150mm.
Concrete Gravel Boards - These are for use with the concrete posts only, making fencing installation quicker and easier, there's no need for gravel board clips it's simply a case of slotting the concrete gravel boards into the slots in the post and away you go. They, like the timber gravel boards isolate fence panels from ground contact to protect them against moisture damage. Fitting a concrete gravel board will raise the height of your fence by either 150mm or 305mm depending on the size selected.
Heavy Duty Timber Post Caps - Heavy duty 120mm post caps for our 95mm Elite posts. Timber post caps will protect the tops of your fencing posts as well as adding quality and durability.
Elite Panel Side Strips - These are used when fitting Elite panels into concrete posts, one of these on either side of the Elite Panels will make the Elite panels the correct size for conventional 1.83m post spacings.
Metpost Gravel Board Clips - These are used to secure timber gravel boards to the timber posts. You will need to order two clips per gravel board. (e.g 4 gravel boards require 8 Metpost gravel board clips).
Metpost Panel Clips - These are used to secure the fencing panels to the posts. You need at least 4 clips per panel, however we advise 6 clips per panel on 5ft and 6ft fencing. (Not required when using H posts).
Metpost Elite Post Anchor - These are a simple way to fit fencing posts into soil, they eliminate the need to dig a hole and concreting. The galvanised Metpost spikes are powder coated to prevent corrosion and are 600mm in length which ensures your fencing stays firm and secure. Assembling fencing has never been easier, it's simply a case of driving the Metpost spikes into the ground then securing the posts using the bolts provided. (For use with 70mm posts).
Metpost Pergola Anchor - These are a simple way to fit fencing posts into soil, they eliminate the need to dig a hole and concreting. The galvanised Metpost spikes are powder coated to prevent corrosion and are 450mm in length which ensures your fencing stays firm and secure. Assembling fencing has never been easier, it's simply a case of driving the Metpost spikes into the ground then securing the posts using the bolts provided. (For use with 95mm posts).
Metpost Bolt Down Shoe - Should you need to fence across an area of concrete or any other hard surface (such as decking) where digging holes for posts would be difficult, Metpost bolt down shoes are the ideal solution. The galvanised Metpost bolt down shoes are powder coated to prevent corrosion. To assemble your posts simply bolt or screw (with your own fixings ensuring this is appropriate for the surface intended) your Metpost bolt down shoe to the hard surface then secure your wooden post in place using the bolts provided. (Available for both 75mm and 100mm posts).
Metcrete is a fast-set post fixing concrete. Easy to use - just add water. For use with wood, metal or concrete posts. Ideal use with Metpost Concrete-in post supports. Sets in 10 minutes and requires no mixing before use.
|
Flat Top Elite Timber Post  | Round Top Elite Post  | Elite Timber H Post  | Slotted Concrete Post  |
Timber Gravel Board  | Concrete Gravel Board  | Heavy Duty Timber Post Cap  | Elite Panel Strip  | |
Metpost Gravel Board Clips  | Metpost Panel Clips  | Metpost Elite Post Anchor  | Metpost Pergola Anchor  | |
Metpost Bolt Down Shoe  | Metcrete  |
Gate Options
You can purchase as an optional extra a gate which complements your Elite Fencing.
The Elite Chevron Gate by Grange is the must have gate for any garden as it adds style, practicality and extra security. This gate from Grange has a fully mortise and tenon jointed frame. The benefits of mortise and tenon joins in a gate's structure is that it provides the gate with extra strength and durability which is needed for years of use. The complete lattice style will enhance any garden. Supplied with universal bracing for hanging on either the left or right hand side. This gate from Grange has a rounded top rail which is designed to act as a watershed.
The Elite Chevron Gate by Grange is FSC Certified and made from specially selected softwoods, planed and pressure treated for a longer life. With this treatment a preservative is forced into the timber under high pressure, providing effective long term protection against rot and fungus. Pressure treatment is almost colourless except for a light green tint caused by the copper content in the preservative. Gates which are pressure treated require low maintenance, will maintain its lasting good looks and will last for years to come. The pressure treated finish on this gate also allows the natural beauty of the wood to show through. Grange use one of the most environmentally friendly pressure treatment systems.
| Gate Options |
The Elite Chevron Gate | Ironmongery Set |
 |  |
Overall Height - 1.8m (5'9") Overall Width - 0.9m (2'9") Frame - 45mm x 90mm Opening Direction - Universal | Ironmongery Set - is an optional extra with all our Grange Gates.
Pack includes:
1 x Oval Padbolt
2 x Cranked Hook and Band
10" Strap Hinges
1 x 6" Ring Latch |
How to Order Fencing
Panels - Select the amount of fencing panels you require, between 4 and 10. (If you need more, for example 15, select 10 panels, click 'Add to Basket', click 'Continue Shopping', select another 5 panels) This method is usually cheaper than using the 'Add Additional Panels' option, however, use the 'Add Additional Panels' feature if you only require 1 or 2 extra panels. Note if you require 11 panels you will need to select 10 Panels as described above then click on the check box next to 'Add Additional Panels'.
Panel Clips - Choose the amount of panel clips you require, in relation to how many fencing panels you are ordering. For 3ft and 4ft fencing we recommend that you order 4 clips per panel. For 5ft and 6ft fencing we recommend 6 clips per panel. To add to your order either enter the quantity you require or click the '+' button to increase the quantity.
Optional Gravel Boards - You will need one gravel board per panel. Also be aware that by fitting a gravel board you will raise the height of your fence. To add to your order either enter the quantity you require or click the '+' button to increase the quantity.
Optional Fencing Posts - Normally you will need 1 more post than the number of panels (4 panels requires 5 posts etc). If you wish to order fencing posts, select the desired size by choosing 75mm or 100mm and either enter the quantity you require or click the '+' button to increase the quantity. When using posts WITHOUT Metpost fixings options the posts must be 2ft higher than the fencing panel, this allows 2ft of the post to below ground level ensuring your fencing is secure. (e.g for 4ft high fencing 6ft high posts would be bought)
Optional Post Caps - You can purchase post caps to fix on top of posts to give added durability. Purchase the same number of post caps as you have posts, and select the correct size (e.g. 75mm posts require 100mm caps, 90mm posts require 125mm caps). If you wish to order post caps, select the desired size by choosing 100mm or 125mm and either enter the quantity you require or click the '+' button to increase the quantity.
Optional Drive-In Spikes - You will need one spike per post. To add to your order either enter the quantity you require or click the '+' button to increase the quantity.
Optional Flush Fit/Bolt Down Shoe - You will need one shoe per post. To add to your order either enter the quantity you require or click the '+' button to increase the quantity.
Optional Concrete-In Shoe - You will need one shoe per post. To add to your order either enter the quantity you require or click the '+' button to increase the quantity.
Optional Drive-In Tool - To be used with Drive-In Spikes. To add to your order, just click the check box.
Metcrete - For use with wood, metal or concrete posts. Sets in 10 minutes and requires no mixing before use. 1 bag is required per post. To add to your order, just click the check box.
When you have finished and are satisfied with your order, click the green 'Add to Basket' button and follow the checkout procedure.
Delivery Information:
ALL DELIVERIES ARE DELIVERED TO KERBSIDE, FENCING PANELS COME FULLY ASSEMBLED AND ARE FLAT PACKED READY FOR SELF FITTING.
Booking Delivery - Your delivery will take place between 10 and 15 working days from date of order. This manufacturer operates a text system to your mobile phone and you will receive two text messages, the first alerting you that the order is being scheduled for delivery and the second to confirm a delivery date. If no mobile phone number is available you will be contacted by Email.
You can address any problems with the team as required before accepting the proposed delivery date to your satisfaction. On the morning of delivery you will normally receive a call from the delivery driver.