Product Description:
The Rosedale metal sheds offer one of the best guarantees around - a 15 Year No Rust Perforation Guarantee which shows how confident they are about their metal sheds. The reason these Rosedale metal sheds are able to offer such a terrific guarantee lies in the fact that their sheds are made from hot dipped galvanised steel throughout, this specification means that the Rosedale  metal sheds will not crack and will maintain their lasting good looks. This is not the case for many other metals sheds on the market which only offer an inferior electro galvanized protection or part hot dipped galvanised steel which will make them vulnerable to rust and certainly not suitable for coastal areas with their high salt atmosphere. Sheds from our shed baron range are taller and sturdier than almost all other  similar steel sheds. They are also rot and rodent proof.

Walls - Both the interior and exterior walls of these metal sheds consist of 5mic Epoxy Primer together with 20 mic modified polyester to the outside of the panel and 10 mic Epoxy Lt Grey to the Inside Panels. The panels have a 180g zinc coating/m2. This treatment to the Rosedale metal sheds allows for a more substantial and aesthetically pleasing finish. The Walls are made from fully hot-dipped galvanised steel with a 0.25mm thickness. The paint finish is not included in this thickness as it is applied after this measurement is taken whereas most other sheds on the market include the paint as part of the thickness of their steel.

Framework - The framework is made from fully hot-dipped galvanised steel. The Shed Baron base metal thickness is 0.55-0.7mm thick, which again is measured before any coating is applied. The framework is then coated in a 275g zinc coating/m2. This kind of manufacturing provides: extra thickness in the framing, greater stability to the overall structure and the thicker coating makes the building rust free, which is essential around the base area where most steel buildings would be most likely to rust.

Wall Heights - All Rosedale metal sheds have an eaves height of 165cm, which is taller than other metal sheds in the current market. The ridge height of the 8' wide Shed is 203cm. Many other metal sheds use extra high gables which makes these sheds appear to be larger; the actual effect of this is that it reduces the height of the door opening. This means you have to duck slightly to get into other sheds, whereas our range allows most people to walk straight into the shed.

Ventilated Gables - The gables are ventilated to allow consistent airflow throughout the shed and reduce the build up of condensation. This is an important feature to consider when purchasing a metal shed.
Entry and Exit Ramp - These metal sheds come complete with a sturdy ramp which makes entry to and exit from the shed easy - even with wheel barrows or lawn mowers.

Optional Accessories - The Shed Baron Parkdale range of metal sheds offer optional accessories: Hilti Screws and Steel Foundation Kit. This selection of optional accessories will allow you to tailor your metal shed and maximise the potential storage and usage of your metal shed.

The Hilti Hammer Screw Kit - A complete kit containing the correct number of fasteners to anchor your shed, plus a free masonary drill bit to drill in to your concrete or flagstone base. After construction of the shed, simply position the shed in its final position, drill down through the pre-punched anchor holes in the inside of the base rail and simply hammer in the fasteners.  Screws are slot headed to enable removal later if required. The Hilti Hammerscrew kit is an alternative to a base floor option as they will afix to a prepared base.

Foundation Kit - The Foundation Kit comprises of galvanised steel channels which assemble to give a foundation area. This foundation area should later be filled with concrete after first inserting a plastic sheet below to prevent dampness rising.

Specification Table:

Please note: All measurements are approximate and Rosedale Metal sheds are made from metric measurements. Nominal Model sizes are based on roof dimensions.  Please refer to the table below for accurate roof and base measurements.

Base Information

The Rosedale metal sheds are not supplied with a base.  It is essential that the buildings are anchored to a suitable concrete or slab base.  Full details on preparing a base for these buildings will be sent prior to the unit being delivered. 

Delivery Information:

ALL DELIVERIES ARE DELIVERED TO KERBSIDE AND ARE FLAT PACKED READY FOR ASSEMBLY.

FREE UK Mainland Delivery*

*Elbec strive to offer all of its customers Free Delivery however, for some parts of the UK we have to levy an additional charge. Please call our Sales Team if you require this option. Postal Codes which may not apply for free delivery:
AB, BT, DD, FK, HS, IM, IV, KY, KW, PA, PH, ZE.

Booking Delivery:
We offer a system of pre-booked delivery days.  Once your order has been placed you will be contacted within 7 working days either by email or letter and given an expected week commencing date for your delivery date.  You will then be contacted 7 working days before the actual delivery date by phone and provided with a confirmed delivery date. You will also be given a good AM or PM delivery slot.

Assembly Service:
We offer an optional assembly service on our Baron Grandale range of metal sheds. Please refer to the 'Choose any additional extras' above for prices. You will be sent an information pack detailing this service with your delivery date. Please Note if you are looking for assembly of skylight, window kit or shelving you will need to obtain a separate price from our Sales Team on Freephone 0800 019 3865.
Assembly Options of Shed, Timber Floor Kit and Foundation Kit are available for Mainland UK except Scottish highlands which will incur extra charges.