Features:
- All hot dipped galvanised construction.
- Strong exit and entry ramp across the door width.
- No cracks or warps - rot and rodent proof.
- 15 year non-perforation guarantee.
- Lasting good looks unlike wooden sheds.
- Finished in a dark green with a white trim.
- Ventilated gables to prevent the build up of condensation.
Product Description
The Tynedale is from the NEW EMERALD RANGE. The Tynedale comes in two sizes 6' x 4' and 8' x 4'. It is fully HOT DIPPED GALVANISED throughout. Hot Dipped Galvanised gives the best overall protection to steel. This is superior to the alternative electro-plating or electro galvanised methods on the market. Comes with strong walls and with ventilated gables as standard. We are able to give one of the best guarantees around - a 15 year no rust perforation guarantee. The Tynedale Pent Metal Shed is much heavier and sturdier than almost all other 'thin clad' steel sheds. The gables are ventilated to help prevent condensation building up. The image shows the Tynedale Pent Shed with the optional foundation kit which has been filled with concrete to create a firm and solid floor for the shed.
Delivered flat packed for self-assembly.
Base Accessories
Foundation Kit - Hot Dipped Galvanised base frame assembles to the exact base size of your shed. The Foundation Kit can be sited onto a level, well compacted, drained soil area and then flooded out with concrete for a smooth floor area. Insert a DPC layer under the frame first for maximum damp protection.
Hilti Hammacrews
For safe anchoring of sheds to concrete or slab bases. Fits through pre-drilled holes in the base rail of the shed. Fix by simply hammering on the head of the drive screw. Each kit contains the correct number of fasteners and a masonry drill bit.
Assembly
Please Note: Your building must be firmly anchored to a concrete, flagstone or timber foundation to protect against any wind damage. We recommend a 7.5 - 10cm poured concrete pad or a well grouted flagstone base made to our published 'maximum base foundation' size. This should be constructed on well drained hardcore with a DPC layer inserted approximately 5cm below the top surface. The base should be higher than the surrounding area to permit drainage of rainwater. Full details on preparing a base for the Parkdale Metal Shed will be sent prior to the unit being delivered.
| Footprint | Roof (WxL) | Base (WxL) | Door (WxH) | Ridge Height | Eaves Height |
 | 203 x 122 cm | 195 x112.5cm | 85w x 155h cm | 176cm front | 160cm |
 | 261 x 122 cm | 255 x 112.5cm | 104w x 160h cm | 181cm front | 165cm |
(Please note: all measurements are approximate. The Emerald Range are made from metric measurements.)
Please Note: Customers ordering in the following Postal Regions ONLY - please ring for delivery surcharge in the following postal regions ONLY: All IV, KW1-4, PA34, PA37-39, PH19-26, PH30-41, PH49-50 , AB, BT, DD, FK, HS, IM, IV, KY, KW, PA, PH, ZE