Photograph shows 20' x 10' Pavilion Summerhouse with Double Doors the 10ft measurement includes the 3ft veranda. Delivery Area - payable on delivery

Features:

• Available in 6 different sizes (see footprints section below).
• Tongue and groove mineral felted roof.
• Sturdy 2 1/2" x 1 1/2" (finished) redwood pine frame.
• Resilient 12mm (finished) tongue and groove walls.
• Tongue and groove floor.
• Full Joinery Door fitted with decorative hinges and handles
• 1' spacing between floor bearers provides maximum stability.
• Door may be hinged on either side.
• Windows are placed on both sides.
• Assembly is included in the price!

Product Description

Delivery usually within 10 days in the North West Delivery usually within 10 to 21 days in our Southern area The Pavilion Summerhouse is a fantastic traditional structure which includes a veranda and full joinery double doors as standard on the 14ft and over and single full joinery door on the 10ft and 12ft models. It looks great in any garden.  The verandah is a great place to sit when the weather is far too hot and you need some shade and what a great place to sit in with friends when those evenings start to get cooler.

Assembly is included in the price and it is available in 6 different sizes (see the footprints section below). Constructed using a Redwood Pine frame clad (2 1/2" x 1 1/2" (45mm x 32mm finished) with tongue and groove shiplap walls (12mm finished), floor and mineral felted roof. The summerhouses are pre-treated using a water based industrial product. The floor is supported by floor bearers which are placed approximately 1ft apart for maximum stability. The full joinery double and single door is fitted with decorative hinges and handles depending on your preference. Opening Joinery Windows are placed across the front of the building to keep the interior bright and airy. Not only are these summerhouses great quality, but free assembly is also included in the price! All that you have to do is provide a solid base on which the summerhouse can stand (see building a base below).

Specifications:

(Please note: measurements are approximate.) Footprints: Dimensions are in feet. (Please note the sizes stated are the roof sizes and 4" should be deducted for the footprint dimensions) Prices include assembly. Delivery is free.

Building a Base:
Step 1: Ensure there are no cables or pipes in the area (seek expert advice if necessary). Mark out a level area for the base, ideally using pegs and string - it is very important that this area is squared by ensuring both diagonal distances are the same.
Step 2: Excavate 70mm below ground for hard soil and slightly deeper if you have soft soil (allow for a layer of hardcore). Then, use 1 part cement and 8 parts course sand to make a dry mix. Make enough for a depth of 45mm and spread evenly using a rake until level.
Step 3: To lay the slabs, start from one corner and work outwards using a rubber mallet to tap down the slabs and a spirit level. Butt the slabs together. The base should be higher than the surrounding ground to enhance drainage. When the base is complete simply brush off any excess dry mix on the base.

Delivery note: These sheds are only available for assembly and delivery in the counties of HERTFORDSHIRE, BEDFORDSHIRE, NORTHAMPTONSHIRE, CAMBRIDGESHIRE, BUCKINGHAMSHIRE, MERSEYSIDE & LANCASHIRE. Please ensure that the panels may be taken with ease to the point where the building is to be erected. Due to health and safety the erectors will not carry panels over fences, garages etc. You will be contacted by the erectors/deliverers to arrange a convenient day for the delivery and assembly of your summerhouse. A Deposit of 13% is paid on order and you pay the balance of your order direct to the erectors on delivery/assembly.

Optional Extras: If you would like any of the options shown below, simply click on the picture and add one or more of them to your basket.