Delivery Areas: To see if we deliver and assemble in your area please see below
The following Post Codes are in our Free Delivery Area:
SG, AL, MK, LU, WD and EN
The following Post Codes are partially covered by our delivery service:
CB, CM, CV, E, HP, IG, NN, OX, PE, RG, RM and SL
Please call our Sales Team on 0800 019 3865 for more information on our delivery service.
Direct from the Factory and installed in your Garden The Harrison Pent Roof Shed is of a very high quality and represents fantastic value. Assembly is included in the price and it is available in 11 different sizes (see footprints section below). Other sizes available upon request.
A Deposit is paid on order and the balance taken on delivery. If you require a different size simply select the size you require. The balance to pay is the starting price plus the upgrade price less the deposit payable on order.
The Harrison Pent Shed offers a generous floor to ceiling height, the door is taller then normal. The practical design gives options for alternative door positions. The pent roof shed is ideal along a house wall (see typeF and G for a reverse slope), and fits neatly into tight spaces.
Constructed throughout with Redwood Pine, using a frame (45mm x 32mm finished) clad with tongue and groove shiplap walls (13.5mm finished), door, floor, and mineral felted roof. All Harrison Sheds are pre-treated using a water based industrial product. The floor is supported by floor bearers which are placed approximately 1ft apart for maximum stability. The door is also fitted with a hasp and staple and may be hinged on the left or the right and located on the short or the long side depending on your preference (see specifications section below). Not only are these sheds great quality, but assembly is also included in the price! All that you have to do is provide a solid base on which the shed can stand (see assembly below). All buildings should be treated once assembled.
- Available in 11 different sizes (see footprints below).
- Tongue and groove mineral felted roof.
- Sturdy 45 x 32mm (finished) redwood pine frame.
- Resilient 12mm (finished) tongue and groove walls.
- Tongue and groove floor.
- Tongue and groove door fitted with hasp and staple.
- 1' spacing between floor bearers provides maximum stability.
- Door may be hinged on either side and located on both short and long sides (see specifications).
- Assembly is included in the price!
|Height front||N/A||2.08m or 6'10"|
|Height back||N/A||1.93m or 6'2"|
|Door||0.76m or 30"||1.80m or 71".|
(Please note: measurements are approximate.) This shed is available in any of the configurations shown below, please select the one you require above. The doors may be hinged either way. The number of windows will depend on the size and configuration of pent shed you select.
Footprints: Dimensions are in feet. (Please note the sizes stated are the Roof Sizes and 4" should be deducted for the footprint dimensions) The width of the shed is the front ie looking at the high side with the roof sloping front to back.
The length is taken as the gable end Number of Fixed Windows Included 6 x 4 = 2 / 8 x 8 = 2 / 12 x 10 = 4 6 x 6 = 2 / 10 x 6 = 3 / 14 x 8 = 4 7 x 5 = 2 / 10 x 8 = 3 / 14 x 10 = 4 8 x 4 = 2 / 10 x 10 = 3 / 14 x 12 = 4 8 x 5 = 2 / 12 x 6 = 4 / 16 x 8 = 6 8 x 6 = 2 / 12 x 8 = 4 / 16 x 10 = 6
Erection of the shed is FREE - all that you need to do is provide a solid level base on which the shed can stand. If you already have a base of adequate size then you need not follow these instructions.
Please Note: the number of windows will vary depending where the door is situated. eg sheds with a 6ft or 7ft front in type A or B will have one window, type E with a 6ft or 7ft front will have no windows. Please ensure that the panels may be taken with ease to the point where the building is to be erected. Due to health and safety the erectors will not carry panels over fences, garages etc. You will be contacted by the erectors/deliverers a few days prior to the delivery and assembly of your shed.The Balance of your order is paid direct to the erectors on delivery.